Auger Hawk Helical Screw Pile Torque Sensor
A wireless completely contactless highly accurate torque sensor. Confidently measure and verify heavy duty torque for insertion of helical screw piles.
Large Torque Sensor
Datum Electronics Ltd are the manufacturer of some of the largest inline torque measurements systems in the World where we accurately measure torques of up to 84MNm as sold to some of our valued customers including GE and Siemens.
Based on our expertise for these systems Datum Electronics are introducing the LTS range to our customers requiring to accurately measure Torques from 40kNm up to 500kNm. The LTS (Large Torque Sensor) systems are designed using flanged coupling spacers to allow for simple and efficient inline installation. Datum Electronics have designed a standard range for the LTS systems to allow customers to easily plan and integrate the LTS range into their own test stands.
2-Hole Bolt-On Strain Gauge Sensor
Our series 460 2-hole bolt-on sensor is not only an essential product for measuring micro-strain, but it can also become an integral part of a strain monitoring system for using in harsh environments.
Datum Electronics offers two types of multi-element strain gauge bolt-on strain sensors that have been developed to provide a rugged and robust production sensor with the benefits, associated with a complex strain gauge installation. They have been designed to measure tensile and compressive bending strains ranging from 50 to 1100 micro-strain, for use in applications including vehicles, civil engineering structures, silo, hoppers, vessels, and specialist engineering projects.
3-Hole Bolt-On Strain Gauge Sensor
The series 460 3-hole bolt-on strain sensor has a unique design, eliminating the temperature effect on bending and strain of the application. This enables the sensor to perform in almost any environment and in any weather.
Datum Electronics offers two types of multi-element bolt-on strain sensor that have been developed to provide a rugged and robust production sensor with the benefits associated with a complex strain gauge installation. The bolt-on strain sensors have been designed to measure tensile and compressive bending stresses ranging from 50 to 1100 micro-strain, for use in applications including vehicles, civil engineering structures, silos, hoppers, vessels, and specialist engineering projects.
M425 Rotary Torque Sensor and Rotational Torque Transducer
M425 rotary torque sensor with keyway shafts offers high accuracy of 0.1% and torque measurement range from 0-10Nm up to 60,000Nm as standard. It’s an inline rotation torque transducer, widely used for motor, gearbox and pump torque testing.
RS425 Contactless Torque Transducer
These contactless Torque Transducers are not limited by operational speeds, can fit any shaft and capable of measuring torque from 1nm and up to 500knm, providing highly accurate and reliable torque measurement in many applications.
FF425 Non Contact Flange Torque Sensor
Contactless Torque Transducers with flange couplings at either end with measuring ranges from 0-100Nm up to 30kNm as standard (bespoke sensors up to 16MNm) for a variety of in line static and rotary torque measurement applications.
The Datum Electronics Series FF425 non contact flange torque sensor and FF410 torque sensors have been designed to fit easily inline with any drive train or test rig using standard DIN size couplings. With Flange couplings at either end of the torque transducer, it has many advantages over other torque measurement systems on the market.
Tractor PTO Shaft Monitoring System
Our Power Take Off Shaft Torque & Power Monitoring System, part of Datum’s Smart Farming Solutions, will monitor and log the torque, shaft speed and transmitted power accurately when testing new systems driven from all standard PTO Shafts.
Type 132 0-10V Analogue Load Cell Bolt-on Amplifier Signal Conditioner
The Type 132 Load Cell Amplifier is designed to interface to a full bridge strain gauge based bolt-on load cell or similar sensor, allowing use of the resultant data in a more efficient and productive way.
This model load cell amplifier, Type 132, can be calibrated to provide a 0-10V output for a fixed load range from the sensor
Type 131 0-10V Analogue Load Cell Bolt-on Amplifier Signal Conditioner
The Type 131 Load Cell Amplifier is designed to interface to a full bridge strain gauge based bolt-on load cell or similar sensor, allowing use of the resultant data in a more efficient and productive way.
This model load cell amplifier, Type 131, can be calibrated to provide a 4-20mA output for a fixed load range from the sensor
Reach Out Today
Call us on +44 (0) 1983 282834.
Simply enter your details below and click on the Submit button. Our team will contact you shortly.
Enquire Now
Please fill out the below form and a member of our team will contact you shortly.