
The Datum FF425 Torque Transducer Series has been designed to replace coupling spacers or be mounted between drive line flanges. The standard range is based on DIN flanges to measure from 0-100Nm up to 0-10,000Nm. Bespoke torque transducers with custom flanges and lengths can be supplied as direct replacements for your existing or planned spacers. The bespoke range can cater for flanges from 0-50Nm up to 500KNm.
The Datum FF425 Flanged Torque Sensors are high accuracy, high-resolution torque transducers that are supplied with a signal interface offering 0-10Vdc, +/-10Vdc, 4-20mA, Ethernet, USB and RS485 Serial.

Overall system accuracy and non-linearity is better than 0.1% of full-scale torque. Output resolution at slow data rates (10 samples per second) is 1:250000 and at higher data rates (4000 samples per second) of 1:10000.
The FF425 series compliments the conventional M425 torque sensors and non-contact RS425 ranges of Torque Transducers and Sensors supplied by Datum Electronics range. All of the three ranges utilise the same ARM based technology to provide a high quality torque measurement solutions.
Moreover, our torque transducers are suppli a d with signal interface, PC software to read and configure the outputs and a certificate of calibration.